Cisco 2811 Slot Numbering

4/3/2022/ Comments off

Cisco 2811 Slot Numbering Software

General Information
Manufacturer	Cisco Systems, Inc
Manufacturer Part Number	CISCO2811
Brand Name	Cisco
Product Series	2800
Product Model	2811
Product Name	2811 Router
Marketing Information	The Cisco 2811 provides significant additional value compared to prior generations of Cisco routers at similar price points by offering up to a fivefold performance improvement, up to a tenfold increase in security and voice performance, new embedded service options, and dramatically increased slot performance and density while maintaining support for most of the more than 90 existing modules that are available today for the Cisco 1700, Cisco 2600, and Cisco 3700 Series.
Product Type	Router
Interfaces/Ports
Total Number of Ports	2
USB	Yes
Management Port	Yes
Number of Network (RJ-45) Ports	2
I/O Expansions
Number of Total Expansion Slots	9
Expansion Slot Type	AIM HWIC NME PVDM
Network & Communication
Network Technology	10/100Base-TX
Ethernet Technology	Fast Ethernet
Memory
Standard Memory	256 MB
Maximum Memory	760 MB
Memory Technology	DRAM
Flash Memory	64 MB
Power Description
Input Voltage	110 V AC 220 V AC
Physical Characteristics
Compatible Rack Unit	1U
Form Factor	Rack-mountable Wall Mountable
Height	1.8'
Width	17.3'
Depth	16.4'
Miscellaneous
Package Contents	2811 Router Power Cord, 110V (CAB-AC) Cisco 2800 IOS IP BASE Device manager for routers (ROUTER-SDM) 256MB DDR DRAM Memory factory default for the Cisco 2800 (MEM2800-256D-INC) 64MB CF default for Cisco 2800 Series (MEM2800-64CF-INC) Blank WAN Interface Card Panel (WIC-BLANK-PANEL) Cisco 2800 and 3800 Series Blank network module panel (NM-28/38BLNK-PANEL) Cisco 2811 AC power supply (PWR-2811-AC) RJ-45-to-DB-9 console cable and RJ-45-to-DB-25 modem cable for management access One pair of rack-mount brackets with screws for 19-inch racks Cisco Product Registration Card Cisco 2800 Series Regulatory Compliance and Safety Information document Cisco Router and Security Device Manager (SDM) Quick Start Guide document Cisco 2800 Series Integrated Services Routers Quick Start Guide
Additional Information	Interface Card Slots: Each slot can support HWIC, WIC, VIC, or VWIC type modules RPS: External only, connector for RPS provided by default Operation Altitude (derate 1.5°C per 1000 ft): 27.5°C @ 15 kft 35°C @ 3km/10 kft 40°C @ sea level
Certifications & Standards	IEEE 802.3: 10BASE-T IEEE 802.3u: 100BASE-TX USB 1.1 Safety: UL 60950 CAN/CSA C22.2 No. 60950 IEC 60950 EN 60950-1 AS/NZS 60950 Immunity: EN300386 EN55024/CISPR24 EN50082-1 EN61000-6-2 EMC: FCC Part 15 ICES-003 Class A EN55022 Class A CISPR22 Class A AS/NZS 3548 Class A VCCI Class A EN 300386 EN61000-3-3 EN61000-3-2 TELCOM: Interfaces comply with FCC Part 68, CS-03, JATE Technical Conditions, European Directive 99/5/EC and relevant TBR's

Cisco 2811 Slot Numbering Tool

The second example, a Cisco 2811 router, features much less information because it has only one module in slot 1 and an adaptor in slot 0. The show diag command returns the following information. Remove slot dividers from HWIC slots on Cisco 2811, Cisco 2821, and Cisco 2851 routers as follows: Reach into the HWIC slots on both sides of the slot divider, and squeeze the two halves of the slot divider Step 1 together. Page 126 All empty chassis slots for WAN interface cards and voice interface cards must be covered with blank panels. The Cisco 2811 router features a console port, an auxiliary port, two Universal Serial Bus (USB) ports, four high-speed WAN interface card (HWIC ) slots, two10/100 Gigabit Ethernet RJ45 ports, an Enhanced Network Module (ENM) slot, and a Compact Flash (CF) drive. Note To install double-wide interface cards in Cisco 2811, Cisco 2821, and Cisco 2851 routers, remove the slot divider. When the slot dividers are removed, slot 0 and slot 1 become slot 1, and slot 2 and slot 3 become slot 3. Figure 7 Interface Card Slot Locations on Cisco 2901.